This is a tiny car. Built on an extended HO frame with 1/43 scale turned aluminum rims with resin inserts, I was able to get this little guy to sit low like it should. I had to add a 40 ohm resistor ahead of the motor, as without magnets my 60 Ohm controller was working like an on off button. Adding the 40 Ohm resistor brought it back into range, and it is fast becoming my favorite slot car on the track.
I cast the resin body, wheels and formed the exhaust out of wire solder together, Driver body was made out of Fimo clay and the head is a casting I have.
![]()
![]()
![]()
![]()
I cast the resin body, wheels and formed the exhaust out of wire solder together, Driver body was made out of Fimo clay and the head is a casting I have.
