Clik here to view.
Delivering to Morrison's
This Morrison's Mercedes truck and trailer started of as plastic friction powered toy. After pulling the truck apart and cutting parts out it was all glued back together the pictured brass chassis was...
View Articledecals
Hello to all viewers,I am currently putting together a 1/32nd scale 1954 Chevy Stocker car from a standard kit, which is based on a real car, unfortunately the Race numbers on the side of the car and...
View ArticleMatchbox 1:32 MGTC plastic kit to slot car
I've been asked to start a thread on this after mentioning it in another thread.Anticipating wet weather over Easter I purchased a 1:32 Matchbox MGTC plastic kit off a EBay, I also purchased an FF...
View ArticleClik here to view.
SHADOW DN12 JARAMA 1980
Recently completed Shadow DN12 from JGP MODELS.Parts supplied include a spare rear wing, the parts are very good mouldings and did not require too much fettling or trimming.Parts trimmed and ready to...
View ArticleWhich Halfords rattle can for Lotus green?
As it says on the label, which Halfords rattle can spray paint is closest to Lotus green for a Lotus 30?Thanks for the helpPeter
View ArticleVinyl cutting Machines/Plotters
Does anyone have any experience/advice on these machines? I'm wondering if they would be useful for cutting out simple self adhesive number decals as an alternative to waterside decals. Thanks, Marlon.
View ArticleClik here to view.
1st few attempts at kit building and repaints!
Hello!!finally got round to posting pics of my first attempts at kit building. 1st up, my Lamborghini countach!Built and ready to go!2nd, a repaint of a scalextric mondeo, nsr punto kit and a Ferrari...
View ArticleClik here to view.
Fred C. Dobb's Glitter Bug
Just finished my Glitter Bug, the chassis is a Simple brass one with a 30K MRRC S Can motor.I hope you like itTony
View ArticleClik here to view.
Thorndyke Special - 1/32 Chase-Cars resin
Here's another one of the Chase-Cars offerings the Thorndyke Special and a very nice resin shell indeed. I have wanted a slot version for many years. My version uses the MRRC Sebring chassis with Ninco...
View ArticleClik here to view.
Shadow DN5
Hi all,Thought I should inflict a few photos of my latest build on you!!Tom Pryce's Shadow DN5 is one I have wanted to do for a while. He is buried in the churchyard of the village that I live in...
View ArticleClik here to view.
Microprocessor controller - version 2
Microprocessor controller - version 2I posted a link to my first (well not quite first) microprocessor controller here CODEhttp://www.slotforum.com/forums/index.php?showtopic=79828and this is a second...
View Article1.5mm to 2mm pinion shaft sleeve
Hi Guys.I Need some sleeves that are 2mm outside and 1.5mm inside.Is there anyone out there that can help as AB slotsports don't do them anymore. ThanksDavid
View ArticleClik here to view.
Amon F101
Hi, gents,I´d like to show you my last build.For a "Inter-Club-Series" for formula cars from the 70´s to modern times, held in the two clubs in Odenthal-Blecher and in Bergneustadt I have built an Amon...
View ArticleClik here to view.
1964 BRM P-261, Driven by Graham Hill at the Monaco GP
Well being housebound due to recent health problems (again) has it's advantages, I can build and post photo's of another work in progress.This Time it's a 1964 BRM P-261, as driven by Mr Monaco...
View ArticleClik here to view.
Lego Racer
Here is my Lego Racer, obviously made from a Lego Kit. The chassis is a simple one of brass and piano wire with A JK Hawk 6 motor, Avantslot gears, Slot.it deep guide and the front and rear wheels are...
View ArticlePatto's new DTM bodies...?
I'm looking for a broad racing series and Patto seem to be a good place to start looking for it.But what are people's view on the bodies and decals did by him?Of special interest are the latest DTM...
View ArticleClik here to view.
Mercedes Benz 300Sl
I made a mould from a Tomy kit and cast this resin shell. It uses the PCS chassis and other basic parts. I have yet to fit the wipers and will probably leave the bumpers off. The inserts are not quite...
View Articleslot it spherical bearings
hy, I bought a sidewinder pod from marks scale models and one of the bearings was missing, so he sent me another pod gratis. good dealer! so where can I buy just one bearing. pm me if you've got one...
View ArticleClik here to view.
Conversion & Marriage
Here are my latest builds Tamiya 1:32 Wild Mini 4WD Wildsaurus converted to a slot car and a Revell Easy Kit Lamborghini Countach body married to another Tamiya chassis and converted to slot.
View ArticleClik here to view.
1977 Broadspeed XJ12
Just finished the PreWing XJ12C from the ETCC in 1977. I went to see them at the Silverstone TT so this one is modelled on the D Bell A Rouse car Moving on next to more familiar territory with a Lotus...
View Article